Test TC-119B - Fuel System Lean
NOTE:
For connector terminal ID, see CONNECTOR IDENTIFICATION Directory. For wiring diagram, see WIRING DIAGRAMS
article.
Inspect all O2 sensor wiring and connectors. Repair wiring and connectors as necessary. Perform TEST VER-2A. If wiring and connectors are okay, perform following tests in order until problem is found:
- Fuel pressure. Perform TEST NTC-3A.
- Ignition system. Perform TEST NTC-2A.
- Coolant temperature sensor. Perform TEST NTC-4A.
- MAP sensor. Perform TEST NTC-6A.
- Engine mechanical systems. Perform TEST NTC-18A.