Transaxle Quick Learn Procedure

The quick learn procedure requires the use of the DRBIII scan tool and the DRBIII scan tool cartridge.

This program allows the electronic transaxle system to recalibrate itself. This will provide the best possible transaxle operation. The quick learn procedure should be performed if any of the following procedures are performed:
- Transaxle Assembly Replacement
- Transmission Control Module Replacement
- Solenoid Pack Replacement
- Clutch Plate and/or Seal Replacement
- Valve Body Replacement or Recondition

To perform the Quick Learn Procedure, follow the instructions from the DRBIII scan tool.