October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Power Window Relay
- Remove power window relay from fuse/relay block located under left side of instrument panel. See Fig 1
. Check continuity between power window relay terminals No. 1 and 3. See Fig 2
. Continuity should exist. Check continuity between power window relay terminals No. 4 and 5. Continuity should not exist. If continuity is as specified, go to next step. If continuity is not as specified, replace relay.
- Using jumper wires and a 12-volt power source, apply battery positive to relay terminal No. 1 and battery negative to relay terminal No. 3. Continuity should exist between relay terminals No. 4 and 5. If continuity does not exist, replace relay.
Courtesy of CHRYSLER CORP.
Courtesy of CHRYSLER CORP.