Abs Warning Light Operation: Notes
Turn ignition on. ABS warning light should glow. Turn ignition switch to START position. Warning light should glow for approximately one second and then go out. If warning light functions as specified, go to next step. If warning light does not function as specified, see TROUBLE SHOOTING table.
TROUBLE SHOOTING
| Symptom | Perform Test No. | |
|---|---|---|
| Scan Tool Cannot Communicate | ||
| With All Systems | 1 | |
| With ABS System Only | 2 | |
| When Ignition Is On, ABS Warning Light | ||
| Does Not Illuminate | 3 | |
| ABS Warning Light Remains Illuminated | ||
| When Engine Is Running | 4 | |
| Faulty ABS Operation | 5 | |