Specifications Index
TALON SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | A/C SYSTEM SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | 145-188 Ft. Lbs. (196-255 N.m) | ||
| Battery | |||
| Non-Turbo | See BATTERY SPECIFICATIONS table under CAPACITIES . | ||
| Turbo | See BATTERY SPECIFICATIONS table under CAPACITIES . | ||
| Brakes | |||
| Bleeding Sequence | |||
| With ABS | BLEEDING BRAKE SYSTEM | ||
| Without ABS | See BRAKELINE BLEEDING SEQUENCE table under BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | See appropriate table under DISC BRAKE SPECIFICATIONS . | ||
| Drum Brakes | See appropriate table under DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | |||
| Non-Turbo | See GENERATOR SPECIFICATIONS table under AMPERAGE OUTPUT TEST . | ||
| Turbo | See GENERATOR AMPERAGE SPECIFICATIONS table under AMPERAGE OUTPUT TEST . | ||
| Torque | |||
| Non-Turbo | TORQUE SPECIFICATIONS | ||
| Turbo | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | |||
| Non-Turbo | 14-18 psi | ||
| Turbo | 11-15 psi | ||
| Thermostat R & I | |||
| Non-Turbo | THERMOSTAT | ||
| Turbo | N/A | ||
| Water Pump R & I | |||
| Non-Turbo | WATER PUMP | ||
| Turbo | WATER PUMP | ||
| Engine Mechanical | |||
| Non-Turbo | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | Oil pressure is 4 psi (.28 kg/cm2 ) at curb idle and 25-80 psi (1.75-5.62 kg/cm2 ) at 3000 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Turbo | |||
| Compression | ENGINE COMPRESSION | ||
| Oil pressure | Oil pressure should be 11.4 psi (.80 kg/cm2 ) or more at curb idle with engine oil temperature at 167-194°F (75-90°C). | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| Non-Turbo | 70 Ft. Lbs. (95 N.m) | ||
| Turbo | 100 Ft. Lbs. (135 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | |||
| Non-Turbo | FUEL FILTER | ||
| Turbo | FUEL FILTER | ||
| Pressure Specification | |||
| Non-Turbo | FUEL PUMP | ||
| Turbo | FUEL PUMP | ||
| Fuel Pressure Test Procedure | |||
| Non-Turbo | 4-CYLINDER FUEL PRESSURE TEST | ||
| Turbo | FUEL PRESSURE | ||
| Fuel Pressure Release Procedure | |||
| Non-Turbo | 4-CYLINDER FUEL PRESSURE RELEASE | ||
| Turbo | FUEL PRESSURE RELEASE | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | |||
| Non-Turbo | HIGH TENSION WIRE RESISTANCE | ||
| Turbo | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | |||
| Non-Turbo | FIRING ORDER & TIMING MARKS Wire routing may be located in Figures. | ||
| Turbo | FIRING ORDER & TIMING MARKS Wire routing may be located in Figures. | ||
| Spark Plug | |||
| Non-Turbo | SPARK PLUGS | ||
| Turbo | SPARK PLUGS | ||
| Starting | |||
| Starter | STARTER SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Lug Nut Torque | 65-80 Ft. Lbs. (88-108 N.m) | ||