LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 1966 >> 124 >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> SOLEX C 32 PHH/6 2-Barrel >> Adjustment >> Float Level Adjustment
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Float Level Adjustment

NOTE: It is necessary to use Solex Float Level Adjust merit Tool Gauge A. 95128 to perform float level adjust merits.
  1. Remove float chamber cover and floats. Make sure that float and needle valve are not damaged during removal.
  2. Place float on Gauge A. 95128 with eye of float arm installed on pin on gauge. Floats should seat correctly on the three points on the gauge. If the float does not seat properly, adjust position by bending float arm.
  3. To check the height of the needle in its seat, there are two notches on one side of the gauge. Place that side of the gauge on the underside of the float chamber cover. One of the notches corresponds to the maximum needle height, the other notch corresponds to minimum needle height. The height of the needle should be between these two points. If height is not correct, add or remove shims between valve body and carburetor body.
scientia non olet · About LEMON Manuals