Generator - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the accessory drive belt Serpentine Accessory Drive Belt - Removal.
3. Support and raise the vehicle.





4. Remove the belly pan (1) covering the bottom side of the engine compartment.





5. Remove the right side axle shaft (1).





6. Disconnect the field generator harness connector.
7. Remove the generator B+ cable retainer.
8. Remove the cable from the generator stud.
9. Remove the top generator mounting bolt (1). This bolt is located between the generator and the a/c compressor.
10. Remove the bottom two generator mounting bolts (2).
11. Carefully remove the generator (3).