Park Assist Module - Installation

INSTALLATION





1. Position the park assist module (4) to the right quarter inner panel, at the rear C-pillar.
2. Engage the lower mounting tab of the module into the stamped pocket (3) in the right quarter inner panel.
3. Secure the upper mounting tab of the module to the inner panel using fastener (1) and tighten securely.
4. Reconnect the three body wire harness connectors (2) to the module connector receptacles.
5. Reinstall the trim onto the right quarter inner panel. Rear Quarter Trim Panel - Installation.
6. Reconnect the battery negative cable.