Common Specs & Procedures Index

FIAT 500E COMMON SPECS & PROCEDURES

System		Specification/Procedure
Air Conditioning
Service		A/C SYSTEM
Torque		FASTENER TORQUE
Axle Nut/Hub Nut
Front		229 ft. lbs. (310 N.m)
Rear		207 ft. lbs. (280 N.m)
12-Volt Battery		SPECIFICATIONS
Brakes
Bleeding Sequence		STANDARD PROCEDURE - BASE BRAKE BLEEDING , STANDARD PROCEDURE - ANTILOCK BRAKE SYSTEM BLEEDING
Disc Brakes
	Service Specifications	SPECIFICATIONS
	Torque	TORQUE SPECIFICATIONS
Drum Brakes
	Service Specifications	N/A
	Torque	N/A
Charging
Generator		N/A
Torque		N/A
Drive Belts
Adjustment		N/A
Drive Belt Routing		N/A
Engine Cooling
General Service Specifications		N/A
	Radiator Cap Pressure	N/A
	Thermostat R & I
	DOHC	N/A
	OHV	N/A
	Water Pump R & I
	DOHC	N/A
	OHV	N/A
Engine Mechanical
OHV
	Compression	N/A
	Oil Pressure	N/A
	Overhaul	N/A
	Torque	N/A
DOHC
	Compression	N/A
	Oil pressure	N/A
Overhaul		N/A
	Torque	N/A
Fluid Specifications		See FLUIDS under MAINTENANCE/FLUIDS tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive Plate Torque		N/A
Fuel System
Pressure Specification		N/A
	Fuel Pressure Test Procedure	N/A
	Fuel Filter Location	N/A
	Fuel Filter R & I	N/A
Ignition
Firing Order & Cylinder Identification		N/A
Ignition Wires (Resistance)		N/A
Ignition Wires (Routing)
OHV		N/A
DOHC		N/A
Spark Plug
OHV (N/A)
	Gap	N/A
	Torque	N/A
DOHC (N/A)
	Gap	N/A
	Torque	N/A
Starting
Starter		N/A
Torque		N/A
Wheel Alignment
	Adjustment Specifications	SPECIFICATIONS
	Torque	Front: SPECIFICATIONS , Rear: SPECIFICATIONS
Wheel & Tire
Wheel Lug Nut Torque		Steel Wheel: 63 ft. lbs. (85 N.m), Aluminum Wheel: 75 ft. lbs. (100 N.m)