Removal And Installation

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Disconnect the Transmission Range (TR) switch wire harness connector.

   Courtesy of CHRYSLER GROUP, LLC

3. Lift up the lock washer (1) using a suitable screwdriver.
4. Remove the nut (2) and lock washer (1).
5. Remove the TR switch bolt (3).
6. Remove the TR switch (4).

INSTALLATION 

Courtesy of CHRYSLER GROUP, LLC

1. Install the Transmission Range (TR) switch (4).
2. Install the TR switch bolt (3) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
3. Install the TR switch lock washer (1) and nut (2) and tighten to the proper specification. Refer to TORQUE SPECIFICATIONS  .
4. Using a suitable tool, push down the lock washer (1) tabs.
5. Remove the support and lower the vehicle.