LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2018 >> 500 Abarth, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) - 500 >> Sensor, Knock >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Sensor, Knock: Removal

GC0152355Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the negative battery cable.
  2. Raise and support the vehicle. Refer to HOISTING .
  3. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
  4. Remove the knock sensor electrical connector (1).
  5. Remove the mounting bolt (3) and knock sensor (2).