October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Sensor, Coolant Temperature: Installation
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the engine coolant temperature sensor (4) into the thermostat housing.
- Connect the wire harness connector.
 Courtesy of CHRYSLER GROUP, LLC
|
- Install the battery (4) and the hold down clamp. Tighten the nut to 55 N.m (40 ft. lbs.).
- Install the air intake assembly.
- Fill the cooling system. Refer to STANDARD PROCEDURE .
- Connect the positive and negative battery cable.