LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2019 >> 500X Pop >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Accelerator Pedal Position >> Removal And Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Installation

  1. Install the accelerator pedal and securely tighten the screw.
  2. Connect the accelerator pedal wire harness connector.
  3. Install the left front floor air outlet. Refer to AIR OUTLETS - FRONT FLOOR, INSTALLATION .
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals