LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Fiat >> 2019 >> 500X Pop >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Accelerator Pedal Position >> Removal And Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal And Installation: Removal

  1. Disconnect and isolate the negative battery cable.
  2. Remove the left front floor air outlet. Refer to AIR OUTLETS - FRONT FLOOR, REMOVAL .
    GC0163367Courtesy of CHRYSLER GROUP, LLC
  3. Disconnect the accelerator pedal wire harness connector (1).
  4. Remove the screw (2a), push up to release and remove the accelerator pedal (2b) from the pedal support.
scientia non olet · About LEMON Manuals