LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1974 >> Courier Automatic Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition Systems - Solid State Ignition >> Testing >> Test Procedures
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedures

VOLTAGE TESTS(1) SPECIFICATIONS CORRECTIONS
With Key On     
Pin #3 and engine ground Battery voltage ±. 1V Module bias test
Pin #5 and engine ground Battery voltage ±.1V Battery source test
While Cranking Engine     
Pin #1 and engine ground 8 to 12 volts Cranking test
Pin #5 and engine ground 8 to 12 volts Starting circuit test
Pin #7 and pin #8 Any D.C. wiggle 1/2 V. min. Distributor hardware test
(1) Make test between points indicated.
RESISTANCE TESTS(1) SPECIFICATIONS CORRECTIONS
With Key Off     
Pin #7 and pin #8 400 to 800 ohms Magnetic pickup stator test
Pin #6 and engine ground 0 ohms
Pin #7 and engine ground more than 70, 000 ohms
Pin #8 and engine ground more than 70, 000 ohms
Pin #3 and coil tower 7, 000 to 13, 000 ohms Ignition coil test
Pin #5 and pin #4 1.0 to 2.0 ohms
Pin #5 and engine ground more than 4.0 ohms Short test
Pin #3 and pin #4 1.0 to 2.0 ohms Resistance wire test
(1) Make test between points indicated.
scientia non olet · About LEMON Manuals