Remove & Install or Remove & Replace
WARNING: This page is about the Bronco 5.8L Eng VIN H, Full Time T/Case Control, which is a different variant/trim than selected.
Includes: Adjust toe-in on Rack and Pinion type Steering Gears. NOTE: Deduct .4 if alignment is also performed.
DOES NOT include transfer of components.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 1.0 | 0.7 | B | ||
| Additional Procedure: STEERING GEAR (COMPLETE): Remove & Install or Remove & Replace: | ||||
| If necessary to Bleed System add | 0.4 | B | ||
| Combination Procedure: TIE ROD &/OR END: Replace: | ||||
| Each | 0.2 | B | ||