6 Cylinder Models

Mark hinges for installation and remove hood. Drain crankcase and cooling system, disconnect battery and remove air cleaner. Disconnect all radiator and heater hoses and remove radiator. Remove fan, spacer, belt, and pulley. Disconnect accelerator linkage, fuel line, all electrical connections, and vacuum lines at engine.
NOTE: If engine is equipped with Thermactor system, remove or disconnect all components of system that will interfere with removal of engine.
On models equipped with power steering or air conditioning, remove unit from mount and lay aside with hoses attached. Remove starter.
On manual transmissions, disconnect the clutch retracting spring. Disconnect clutch equalizer shaft and arm bracket at underbody and remove.
Raise vehicle and remove flywheel or converter housing upper attaching bolts. Disconnect muffler inlet pipe at exhaust manifold. Disconnect right and left engine mounts at underbody bracket. Remove flywheel or converter housing cover.
Lower vehicle and support transmission on a jack. Attach suitable hoisting tackle to engine lifting brackets and remove engine from vehicle.