MOTORCRAFT DURA-Spark & Solid State Ignition: Overhaul: Distributor: Disassembly
- Remove distributor cap and rotor. Disconnect distributor harness plug. Using 2 screwdrivers, pry armature off of advance plate sleeve and remove roll pin.
- Remove wire retaining clip and snap ring securing vacuum advance link to pick-up assembly. Remove pick-up assembly retaining screws and remove assembly from distributor.
- Remove vacuum advance arm from pick-up assembly and position it against distributor housing. Remove vacuum advance diaphragm. Remove attaching screws and base plate assembly from distributor.