LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1981 >> Cutaway 4.9L Eng VIN E >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> MCU Engine Control System >> Diagnosis & Testing >> Preparation For Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Preparation For Testing

  1. Check vacuum hoses for leaks, cracks, or improper routing. Repair or replace as necessary.
  2. Check electrical connections. Repair any frayed or broken wires. Ensure that all connections are clean and tight.
  3. Turn all accessories off. Place transmission in neutral and set parking brake. Warm engine to normal operating temperature. If air cleaner must be moved, leave all vacuum hoses attached.
    NOTE: If vehicle will not start, see No Start Test (No. 2).
  4. Turn ignition off. Locate Self-Test connector and insert a jumper wire between ground and Trigger sockets. Connect the positive lead of a needle-type voltmeter to vehicle battery positive terminal, and the negative lead to Self-Test output socket. Set voltmeter on 15-20 volt scale. Battery voltage may be shown.
scientia non olet · About LEMON Manuals