LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1984 >> Bronco 5.8 H >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Windows - Side >> Testing >> Multiple Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multiple Switch

  1. Remove switch from vehicle. Using an ohmmeter or self-powered test lamp, clip a test probe on pin No. 6, which is grounded. See Fig 1 . Place both switches in neutral position and test for continuity between pin No. 6 and pins No. 1 through 4.
    Fig 1: Multiple Switch Pin Location Use ohmmeter or self-powered test lamp for test.
    G10805
  2. Push both switches upward. Both No. 1 and No. 3 should lose continuity to pin No. 6. Push switches downward. No. 2 and No. 4 should lose continuity to pin No. 6.
  3. Remove test probe from No. 6, and connect it to feed pin No. 5. With both switches in neutral position, no continuity should exist at remaining terminals.
  4. Push switches upward. Both No. 1 and No. 3 pins should show continuity with No. 5. Push both switches downward. Both No. 2 and No. 4 pins should have continuity with No. 5. If any switch does not test as indicated, replace complete switch assembly.
Fig 2: Single Switch Pin Locations Use ohmmeter or self-powered test lamp for test.
G10806
scientia non olet · About LEMON Manuals