LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1984 >> Bronco II Standard >> Repair and Diagnosis >> Engine Performance >> System >> Deceleration Control System >> Testing >> Electronic Governor Module Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Electronic Governor Module Check

  1. Check harness as follows: Number harness terminals from 1 to 8, with No. 1 being nearest the locator key.
  2. With engine running, connect tachometer to terminals 1 and 2. Engine RPM should be indicated. Next, turn ignition switch "ON". Connect positive lead of voltmeter to terminal 1 and negative lead to terminal 8. Battery voltage should be indicated.
  3. Turn ignition switch "OFF". Connect one lead of ohmmeter to terminal 4 and other lead to terminal 6. Ohmmeter should read continuity. Repeat same test between terminals 5 and 7. Continuity should again be indicated.
  4. If any terminals fail any tests, repair wiring harness as required. If harness meets all specifications, replace electronic governor module.
scientia non olet · About LEMON Manuals