Code/Test Menu (KOER)
KEY ON-ENGINE RUNNING (KOER) SELF-TEST RESULTS
| On Demand Codes | Proceed to Test: | ||
|---|---|---|---|
| 11 | (1)CONTINUOUS TEST | ||
| Any | See Code No. Below | ||
| None | Repeat self-test; then TEST D | ||
| 12 | TEST J | ||
| 13 | TEST J , step 11) | ||
| 21 | TEST E | ||
| 22 | TEST F | ||
| 23 | TEST G | ||
| 41 | TEST I | ||
| 42 | TEST I , step 14) | ||
| 43 | TEST I , step 23) | ||
| 44, 45, 46 | TEST P | ||
| 58 | TEST H | ||
| 72 | TEST F , step 10) | ||
| 73 | TEST G , step 14) | ||
| 77 | TEST Q | ||
|
|||
NOTE:
If engine stalls while testing, proceed to TEST D, step 10).
Deactivate the self-test. Start and run engine at more than 2000 RPM for 2 minutes. Turn engine off and wait 10 seconds. Activate self-test. Start engine. Test will proceed with Engine ID code, Dynamic Response code and Engine Running On Demand Service codes. If a 10 or 1 pulse occurs during Dynamic Response code, open throttle wide open momentarily. Record codes and proceed as follows: