LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1987 >> Thunderbird Base, 5.0 F >> Repair and Diagnosis >> Engine Performance >> System >> 5.0L SEFI EEC IV Testing >> Quick Test >> Key On/Engine Running (KOER) Self-Test >> Code Output
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Code Output

  1. Deactivate SELF-TEST (disconnect jumper wire). Start engine and run it at 2000 RPM for 2 minutes to warm up HEGO sensor. Turn engine off and wait 10 seconds
  2. Start engine. Insert jumper to activate SELF-TEST. The engine ID code will be displayed.
  3. If a Dynamic Response code occurs, briefly accelerate engine to wide open throttle (WOT). DO NOT  depress throttle during test unless a Dynamic Response code occurs. The KEY ON/ENGINE RUNNING (KOER) SELF-TEST  service codes will then be displayed. Observe and record all codes.
NOTE: On the 5.0L SEFI engine a service code 98 may appear instead of the engine ID code, indicating the need to obtain a code 11 for the KEY ON/ENGINE OFF (KOEO) SELF-TEST  portion of the QUICK TEST  .
scientia non olet · About LEMON Manuals