Self-Leveling - Models With Air Suspension
NOTE:
Pre-alignment procedure on all models with air suspension should be performed before alignment or ride height is checked so air suspension system will vent to trim. If vehicle is 20°F (-7°C) or more colder or warmer than alignment area, time must be allowed for vehicle to match alignment area temperature.
- Position vehicle on alignment rack. Turn ignition to "OFF" and exit vehicle. Level rack as necessary. Re-enter vehicle and turn ignition to "RUN" (DO NOT start).
- Allow one minute for vehicle to level. Push trunk release, turn off ignition and exit vehicle. Allow 20 seconds for vehicle to vent to trim height (all doors closed).
- Turn off air suspension system switch in trunk on left quarter panel. Check for proper ride height and alignment.