Mechanical Specifications

IDLE SPEED 725-750 rpm

TORQUE VALUES
Accelerator Cable Bracket 21-27 Nm (15-20 ft lbs)
Air Bypass Valve to Upper Manifold 8-11 Nm (71-97 in lbs)
Air Supply Tube Clamps 1.7-2.6 Nm (15-23 in lbs)
Engine Oil Dipstick 20-30 Nm (15-22.5 ft lbs)
Fuel Filter Bracket Clamp 1.7- 2.8 Nm (1 5-25 in lbs)
Fuel Gauge Unit Installation ring 81-115 Nm (60-85 ft lbs)
Fuel Pressure Regulator to Injector Manifold 8-11 Nm (71-97 in lbs)
Fuel Pressure Relief Valve 5.5-9.5 Nm (49.2-84 in lbs)
Fuel Pressure Relief Valve Cap 0.5-0.7 Nm (4-6 in lbs)
Fuel Injector Manifold to Fuel Charging Assembly 8-11 Nm (71-97 in lbs)
Lower Intake Manifold to Block 16-20 Nm (11-15 ft lbs)
Throttle Body to Upper Intake Manifold 8-12 Nm (6-9 ft lbs)
Throttle Position Sensor to Throttle Body 2.8-3.8 Nm (25-33 in lbs)
Upper Int.Manifold to Lower Int.Manifold Bolts 16-20 Nm (11-15 ft lbs)