LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Bronco II RWD, Standard, FM132 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Test H - Fuel Control >> Test H: Step 28 >> All Other Engines
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

All Other Engines

Disconnect the PCV valve hose from the PCV valve.

Start engine and run at approximately 2000 RPM. DVOM should indicate less than 0.4 volt within 30 seconds. If not, replace HEGO sensor. Reconnect vacuum hoses and repeat QUICK TEST. If voltage is to specification, HEGO sensor is okay. If engine has sequential PFI, fuel delivery is okay, problem is in an area common to all cylinders, such as a vacuum leak, fuel contamination, EGR system, MAP frequency, etc. Service as necessary. For all other engines, go to step 1) of this test.