LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Cutaway 7.3 M >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Basic Testing) >> DISTRIBUTORLESS Ignition System (Dis) 2.3L >> Test 11, Right Coil Pack Fault, Isolate Dis Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 11, Right Coil Pack Fault, Isolate Dis Module

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Ford Ranger, 1991 Ford RV Cutaway, 1991 Ford Pickup, 1991 Ford F-Super Duty, and 1991 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

With key off, disconnect diagnostic cable connector from DIS module (Pins No. 7-12). See Fig 1. Repeat test procedures in TEST 10. If test light illuminates during both tests, replace DIS module, and check for fault codes. See TESTS W/CODES article in the ENGINE PERFORMANCE Section. If test light does not illuminate during both tests, go to next test.

Fig 1: Identifying DIS Module Pin Locations
G113251Courtesy of FORD MOTOR CO.