Test 15, Check Dis Module Coil Drivers
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 1991 Ford Ranger, 1991 Ford RV Cutaway, 1991 Ford Pickup, 1991 Ford F-Super Duty, and 1991 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
Connect LED test light between breakout box pins No. (+) J18 (RC1D) and (-) J60 (BAT -). Crank engine. Connect test light between breakout box pins No. (+) J10 (RC2D) and (-) J60 (BAT -). Crank engine.
If test light blinks continuously during both tests, go to next test. If test light does not blink continuously during both tests, replace DIS module, and check for fault codes. If vehicle still does not start, go to next test.