Output State Check: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1992 Mercury Tracer, 1992 Mercury Topaz, 1992 Mercury Sable, 1992 Mercury Grand Marquis, and 1992 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
OUTPUT STATE CHECK is used as an aid in servicing output actuators associated with EEC-IV system. It allows technicians to energize and de-energize most system output actuators on command. This mode is entered from KOEO SELF-TEST after all codes have been retrieved. Leave SELF-TEST activated, and depress throttle to initiate test sequence. Each time throttle is depressed and released, output actuators will change state (from on to off or off to on).