LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1990 >> Tempo Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Servicing - A/T) >> Checking Fluid Level
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Checking Fluid Level

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1991 Mercury Tracer, 1991 Mercury Topaz, 1991 Mercury Sable, 1991 Mercury Grand Marquis, and 1991 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: On AXOD-E transaxle, fluid level should only be checked when fluid has established operating temperature 150-170 °F (66-77 °C)(dipstick is hot to the touch).
  1. Transmission or transaxle must be at normal operating temperature with vehicle on level ground. Apply parking brake and run engine at curb idle. Shift gear selector lever through all positions, ending in Park.
  2. Fluid level should be in crosshatch area if checked at operating temperature. If transmission is at room temperature, fluid level should be between two dimples on bottom of dipstick.
  3. DO NOT  overfill. Check condition of fluid for contamination or burned smell. Fully reseat dipstick.