Relay Operation Check
WARNING: This page is about a different car, the 1990 Ford Probe and 1989 Ford Probe. However, it is still accessible from the selected car via links, so may be relevant.
Ensure ignition is off. Disconnect ABS control module. Turn ignition on. Using jumper wire, connect Black/Blue wire at ABS control module connector to ground. If relay clicks, go to PINPOINT TEST FSR-9 . If relay does not click, inspect Black/Blue wire from relay to ABS control module. If fault is found, repair wire. If no fault is found, go to PINPOINT TEST FSR-6 .