Torque Specifications
WARNING: This page is about a different car, the 1990 Mercury Grand Marquis, 1990 Lincoln Town Car, 1990 Lincoln Mark VII, and 1990 Ford LTD Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Front Lower Control Arm Inner | ||||
| Pivot-To-Subframe Adjusting Nut | 96-110 (130-150) | |||
| Rear Control Arm Adjusting Rod Lock Nut | 41-59 (55-80) | |||
| Rear Lower Control Arm Inner | ||||
| Pivot-To-Frame Bracket Adjusting Nut | 70 (230) | |||
| Rear Tie Rod Adjusting Nut "B" | 35-50 (47-68) | |||
| Strut Mount-to-Strut Tower Attaching Nut (Mark VII) | 55-92 (75-125) | |||
| Tie Rod End Adjusting Sleeve Clamp Bolt | 20-22 (27-30) | |||
| Tie Rod End-to-Steering Knuckle (1) | ||||
| Crown Victoria, Grand Marquis & Town Car | 43-47 (59-63) | |||
| Mark VII | 100-120 (136-163) | |||
| Upper Control Arm Inner | ||||
| Pivot-to-Frame Adjusting Bolt | 98 (130) | |||
| Upper Control Arm Inner Shaft-to-Frame Bolt | 100-140 (136-190) | |||
| Wheel Lug Nut | 80-105 (108-142) | |||
| INCH Lbs. (N.m) | ||||
| Rear Tie Rod Adjusting Nut "A" | 72-144 (8-16) | |||
|
||||