October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 11, Check PWR GND To EDIS Module

With key off, set DVOM to 2-k/ohm scale. Measure resistance between breakout box pins No. J27 (PWR GND) and J7 (BAT -). If resistance is less than 5 ohms, replace EDIS module. Remove all test equipment, and check for fault codes. If resistance is greater than 5 ohms, repair open circuit, reconnect all components and check for fault codes. If vehicle still does not start, go to next test.