October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 14, Check For VBAT Open To EDIS Module

With key off and ECA disconnected, set DVOM to 20-volt scale. Measure voltage between breakout box pins No. (+) J51 (VBAT E) and (-) J7 (BAT -). If voltage is greater than 10.5 volts, go to next test. If voltage is less than 10.5 volts, repair open circuit. Remove all test equipment, reconnect all components and check for fault codes.