October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test 10, Check Pip Circuit For Short To Power

With key off and ECA disconnected, set DVOM to 2-k/ohm scale. Measure resistance between breakout box pins No. J43 (PIP E) and J1 (BAT +). If resistance is less than 5 ohms, PIP is shorted in harness. Check connectors, and repair or replace harness. Check for fault codes. If resistance is greater than 5 ohms, replace ECA. Clear Continuous Memory, and check for fault codes.