Front Interval Wipe Module Test: Capri
- Check WIPER fuse in interior fuse block and replace if necessary. Perform FRONT WIPER/WASHER SWITCH TEST . Access interval wipe module connector. Interval wipe module is located below instrument panel near console. Ensure wiper switch is in OFF position. Turn ignition on and measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should not be present. Turn wiper switch to LOW position. Measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should be present.
- Turn wiper switch to HIGH position. Measure voltage at Blue/White, Blue/Black and Blue/Red wires of module connector. Battery voltage should be present. Turn wiper switch to INT position. Measure voltage at Blue/White and Blue/Black wires of module connector. Battery voltage should be present during each cycle. If module does not perform as specified, replace module.