LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Probe GT, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Gear - Variable >> Testing >> Pinpoint Test C3: Steering Angle Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test C3: Steering Angle Sensor Check

  1. Disconnect steering angle sensor connector. Set steering wheel straight. Set VOM on 200-k/ohm scale. Measure resistance between Green and Green/White wires while turning steering wheel slowly from straight to 180 degrees right. If resistance increases from 25 k/ohms to approximately 50 k/ohms, proceed to PINPOINT TEST C4  . If resistance is NOT as specified, replace steering angle sensor.
  2. With steering wheel straight, measure resistance between Green and Green/White wires. If resistance is 20-30 k/ohms, proceed to PINPOINT TEST C4  . If resistance is NOT as specified, replace steering angle sensor.
scientia non olet · About LEMON Manuals