LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1991 >> Ranger 2D Pickup, 2.3 A, RWD, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Electronic DISTRIBUTORLESS Ignition System (EDIS) 4.0L Engine >> Test 16, Check VRS Amplitude At EDIS Module
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Test 16, Check VRS Amplitude At EDIS Module

With key off and ECA connected to breakout box, disconnect diagnostic cable negative lead from battery negative terminal. Set DVOM to 20-volt AC scale. Crank engine, and measure voltage between breakout box pins No. J35 (VRS+ E) and J48 (VRS E). If settled voltage is greater than 0.4 volt, go to TEST 46. If settled voltage is less than 0.4 volt, go to TEST 25.