Fuel Supply Manifold Assembly - 2.3L: Installation

1. To install, reverse removal procedure. Lubricate NEW "O" rings with a light oil. Install 2 "O" rings on each injector (one per injector if injectors were not removed from fuel supply manifold). DO NOT use silicone grease.
2. Install fuel injector supply manifold and injectors in intake manifold; ensure injectors are seated. Secure fuel manifold assembly with retaining bolts. Connect injector wiring harness.

Fig 1: Multi-Point Fuel Injection System (2.3L)

Courtesy of FORD MOTOR CO.