LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Automatic >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension - Programmed Ride Control >> Self-Diagnostics >> Pinpoint Test B4 >> Steering Angle Sensor Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor Check

  1. Disconnect steering angle sensor connector. Place steering wheel in straight-ahead position. Set VOM on 200-k/ohm scale. Measure resistance between Green and Green/White wires. Resistance reading should be zero to 15 k/ohms.
  2. Turn steering wheel slowly from straight-ahead position to 180 degrees left. Resistance should decrease to zero, change to 45 k/ohms, and decrease from this value. If resistance is within specification, proceed to PINPOINT TEST B5. If resistance is not as specified, replace steering angle sensor.
scientia non olet · About LEMON Manuals