LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1992 >> Probe GL, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel - Analog >> Testing >> Turbo Boost Gauge Testing >> Boost Sensor Input Check No. 1
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Boost Sensor Input Check No. 1

  1. Measure voltage on Light Green/Yellow wire at boost sensor 4-pin connector. See IDENTIFYING BOOST SENSOR 4-PIN CONNECTOR illustration. Boost sensor connector is located at turbo boost sensor, near center of firewall.
  2. If voltmeter indicates 2-3 volts, go to BOOST SENSOR INPUT CHECK NO. 2. If voltmeter does not indicate 2-3 volts, go to BOOST SENSOR GROUND CHECK.
scientia non olet · About LEMON Manuals