Base Ignition Timing

WARNING: This page is about a different car, the 1994 Ford RV Cutaway, 1994 Ford Econoline, 1994 Ford Cutaway, and 1994 Ford Club Wagon. However, it is still accessible from the selected car via links, so may be relevant.

Ensure idle speed and ignition timing are set to specification. For adjustment procedures, see appropriate ADJUSTMENTS - GASOLINE article in this section. Ensure all accessories are off and transmission is in Park or Neutral. Set parking brake. Ensure vehicle front wheels are in straight-ahead position and idle speed is correct.

NOTE: Always refer to Emission Control Label in engine compartment before attempting service. If manual and label differ, always use emission label specifications.

BASE IGNITION TIMING

Application

Degrees BTDC

Econoline/Club Wagon

⁽¹⁾ 10

⁽¹⁾	With SPOUT in-line connector unplugged.