LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1993 >> Crown Victoria Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Variable Assist >> Quick Tests >> Quick Test H3 >> Wiring Continuity Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wiring Continuity Check

Verify ignition is off. Disconnect EVO actuator valve. Test continuity of circuits No. 330 (Yellow/Light Green wire) and No. 353 (Light Blue wire) from EVO actuator valve to 26-pin control module connector. If continuity exists, proceed to QUICK TEST H4  . If no continuity exists, repair harness as necessary and proceed to QUICK TEST G1  .

NOTE: Always check for pin damage on components before replacement.