Pl6: Check Power Door Lock Switch Function
- Power door lock switch is connected.
- Measure the voltage on the wires at the power door lock switch connector. See POWER DOOR LOCK SWITCH CONNECTOR .
- Are all voltages correct? If yes, see PL7: CHECK SIGNAL TO RELAY . If no, replace the power door lock switch.
POWER DOOR LOCK SWITCH CONNECTOR VOLTAGE
| Switch Position | Wire Color: Green/Orange | Wire Color: Green/Red |
|---|---|---|
| Locked | Less Than 1 Volt | Greater Than 10 Volts |
| Unlocked | Greater Than 10 Volts | Less Than 1 Volt |