Air Flow Meter/Sensor: Service and Repair

REMOVAL

1. Disconnect negative battery cable.

2. Disconnect electrical connector.

Volume Air Flow (VAF) Meter:

3. Remove air duct.

4. Remove attaching bolt.

Volume Air Flow (VAF) Meter:

5. Remove four attaching nuts.

Volume Air Flow (VAF) Meter:

6. Remove meter.

Volume Air Flow (VAF) Meter:

7. Remove gasket.

INSTALLATION

1. Slide new gasket over meter mounting studs.

2. Position meter and install attaching nuts. Torque to 13 - 18 Nm (110 - 152 lb in).

3. Install attaching bolt.

4. Install air duct.

5. Connect electrical connector.

6. Connect negative battery cable.