Switch Performance Check
WARNING: This page is about a different variant/trim than selected.
Switch must be checked in ON (closed) and OFF (open) positions. Switch should function as follows:
- ACS Switch is closed when A/C is on and blower is operating.
- BLMT This switch is closed with fan selector switch in 3rd or HI position.
- CCPS Switch is closed with A/C on and system pressure within normal operation range.
- HPS Switch is closed with A/C on and system pressure exceeding normal operating range.
- IDL Switch is open when throttle is depressed.
- CPP/PNP CPP switch is closed when clutch pedal is depressed. PNP switch is closed when transaxle is in Neutral.
- PSP Switch is open when system pressure is less than 245 psi (16.9 kg/cm2 ). Switch is closed when system pressure is greater than 290 psi (20.0 kg/cm2 ).
- WOT Switch is closed when throttle is open.