Upper Intake Manifold & Throttle Body: Installation

Clean and oil manifold bolt threads. Install NEW manifold gasket. If injectors were removed, lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. To complete installation, reverse removal procedure.

Fig 1: Upper Intake Manifold Tightening Sequence (3.0L)

Courtesy of FORD MOTOR CO.

Clean and oil manifold bolt threads. Install NEW manifold gasket. If injectors were removed, lubricate NEW injector "O" rings with light oil. DO NOT use silicone grease. To complete installation, reverse removal procedure.

Fig 1: Upper Intake Manifold Assembly (4.0L)

Courtesy of FORD MOTOR CO.