LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1994 >> Cutaway E250, E4OD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Fuel System Pressure Release
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System Pressure Release

WARNING: ALWAYS relieve fuel pressure before disconnecting any fuel injection-related component. DO NOT allow fuel to contact engine or electrical components.

Unplug inertia switch, located on right kick panel, just forward of door. Crank engine for approximately 10 seconds. If engine starts, run it until it stalls, then crank engine an additional 5 seconds. Reconnect wiring to inertia switch. Disconnect negative battery cable.

scientia non olet · About LEMON Manuals