Engine Controls - Tests W/Codes - EEC 1.8L: Introduction
NOTE:
The CHECK ENGINE light, located on the instrument cluster, is referred to as Malfunction Indicator Light (MIL) in this article.
Before proceeding with this article, ensure steps in BASIC TESTING - 4-CYL article in the ENGINE PERFORMANCE section have been performed.
If no faults were found while performing BASIC TESTING , proceed with self-diagnostics. If no fault codes are present after entering self-diagnostics, proceed to TESTS W/O CODES - EEC 1.8L article in the ENGINE PERFORMANCE section for diagnosis by symptom.