Engine Compression
WARNING: This page is about a different car, the 1994 Ford Bronco. However, it is still accessible from the selected car via links, so may be relevant.
Check engine compression with engine at normal operating temperature, all spark plugs removed (on dual plugs, remove exhaust side only), and throttle wide open. Ensure crankcase is full and oil is of correct viscosity. With compression gauge installed, use remote starter to crank engine.
Crank engine at least 5 revolutions, and record highest reading. Repeat procedure for all cylinders, using approximately same number of revolutions. Lowest compression reading should not be less than 75 percent of highest compression reading. No cylinder compression reading should be less than 100 psi (7 kg/cm2 ).
COMPRESSION RATIO SPECIFICATIONS
| Application | Compression Ratio |
|---|---|
| 5.0L | 9.0:1 |
| 5.8L | 8.8:1 |